Spark detector FSK
The FSK-1 (FSK-2) spark detector is an opto-electronic monitoring system and has been developed to detect sparks in the near infrared range. The spark detector is suitable for installation in closed piping systems where no outside light can enter the pipe. The spark detector can be installed easily in pipes of different nominal dia/meters (100 - 2000 mm) without any modification of the existing suction system thanks to its special housing. Inspection flaps for maintenance work are not required. Installation diameter is 40 mmand is quickly cut with a special hole-cutter. Maximum ambient temperature should not exceed 60° C. The spark detector is designed to protection class IP 65.
Spark detector FSL
Spark detector with optical fibre for temperatures up to 300° C.
Spark detector FST
Housing as spark detector FSK-1 (FSK-2), but with the following modifications: daylight insensitive thermal spark detector for detecting sparks and heat radiation above 300°C with built-in daylight filter. Suitable for installion in open systems subject to extraneous light, but without direct exposure to sunlight. Maximum ambient temperature of the electronic components 60°C.
Spark detector FSK-S
Electronics as spark detector FSK-1 (FSK-2), but with the following modifications: acid-resistant plastic housing, completely sulphuric acid proof. The spark detector is suitable for installation on production lines in the battery and chemical industries. Detection range up to approx. 25 metres.
By-Pass smoke detector BRM1
By-pass smoke detectors are installed in exhaust air ducts and on the cleaned gas side of filter housings in order to prevent filter fires. Air is extracted continually from the system being monitored by a series of pipes, and fed to an optical smoke detector. In the event of an alarm, the filter system can be switched off or an extinguishing device activated.
Thermal detector THM1
Overheating of material, which could lead to a fire, or temperature in creases during the production process, are monitored by thermal detectors. In the event of an alarm, the filter system can be switched off or an extinguishing device activated.
Brandgasmelder ADICOS
Brandgasmelder detektieren alle Arten von offenen und verdeckten Bränden bereits in der Entstehungsphase.
